Search DePuy Synthes

search

Products

 

About this product

Division: Trauma
Category: Plates and Screws

The 2.7mm/3.5mm VA-LCP® Ankle Trauma system is a comprehensive plating system, consisting of:

  • Medial Distal Tibia Plates
  • Anteromedial Distal Tibia Plates
  • Anterolateral Distal Tibia Plates
  • Distal Tibia T- and L-Plates
  • Lateral Distal Fibula Plates

The plates are part of the Synthes Variable Angle Locking Compression (VA-LCP) System that merges variable angle locking screw technology with conventional plating techniques. The plates are available in stainless steel and feature an anatomic shape and profile, both distally and along the limited-contact shaft. The Combi holes in the shaft portion of the Variable Angle LCP plate combine a dynamic compression unit (DCU) hole with a variable angle locking screw hole to provide the flexibility of axial compression and variable angle locking.  Distally, the fixed-angle construct is designed to facilitate fixation of small metaphyseal and epiphyseal segments where traditional screw fixation may be limited. The K-wire holes accept wires up to 1.6 mm in diameter to provisionally maintain the reduction of articular fragments and to confirm the location of the plate relative to the distal tibia and fibula.

The plates are periarticular plates that are less thick in the metaphyseal region and not ideal for the treatment of primarily metaphyseal or tibial shaft fractures. These are primarily for the treatment of articular injuries.

Fixation with the system has many similarities to traditional plate fixation methods with several important improvements. Variable angle locking screws provide the ability to create a fixed-angle construct at the desired screw angle while using standard AO plating techniques. Variable angle locking provides the capability for fixed-angle constructs in osteopenic bone in multifragmentary fractures where screw purchase is compromised and in fracture patterns where the screw direction must be altered to allow maximum fragment engagement. Similar to other locking screws, the variable angle screws do not rely on plate-to-bone compression to resist patient load, but function similarly to multiple, small, angled blade plates.

The sets are modular which allows customized selection of implants. This also reduces inventory and overall costs by eliminating seldom-used implants.

2.7mm/3.5mm Variable Angle LCP® Ankle Trauma System
 

Indications for Use

The Synthes 2.7 mm/3.5 mm Variable Angle LCP Ankle Trauma System is intended for fixation of the ankle in adults and adolescents (12–21) in which the growth plates have fused, and particularly in osteopenic bone.

 

Medial and Anteromedial Distal Tibia Plates Intended for fixation of osteotomies, fractures, nonunions, malunions, and replantations of bones and bone fragments of the diaphyseal and metaphyseal regions of the distal tibia.

 

Anterolateral Distal Tibia Plates Intended for fixation of osteotomies, fractures, nonunions, malunions, and replantations of bones and bone fragments of the diaphyseal and metaphyseal regions of the distal tibia.

 

Distal Tibia T-Plates and Distal Tibia L-Plates Intended to buttress partial articular fractures and bone fragments of the distal tibia.

 

Lateral Distal Fibula Plates Intended for fixation of osteotomies, fractures, nonunions, malunions, and replantations of bones and bone fragments of the diaphyseal and metaphyseal regions of the distal fibula.

 

 

Features & Benefits

  • The plates are anatomicaly precontoured to help with fracture reduction, and feature rounded edges designed to help reduce soft tissue irritation.
  • Guide blocks are available for each plate in the system, except for the T- and L- plates, to direct screw insertion in the distal portion of the plates at nominal screw angle.
  • The system features the Compression and Distraction technology for fracture reduction.
  • The system incorporates Synthes Variable Angle LCP locking technology to assist in targeting specific ankle fracture patterns.
  • The plates feature variable angle locking holes, with or without the dynamic compression portion. Four columns of threads in the variable angle locking hole provide four points of threaded locking between the plate and the variable angle locking screw to create a fixed-angle construct at the desired screw angle.
    • Plate holes accept 2.7 mm and 3.5 mm variable angle locking screws
    • 2.7 mm or 3.5 mm variable angle locking screws create a fixed-angle construct, with up to 15° off-nominal axis screw angulation (variable angulation within a 30° cone of angulation)
    • 2.7 mm metaphyseal screws can be used in the plate head to compress the plate to the bone
    • 4.0 mm or 3.5 mm cortex screws can be used in the slotted holes in the fibula plates for placement of syndesmotic screws
       
J30537A

All medical devices have associated risks. Please refer to the package insert and other labeling for a complete list of indications, contraindications, precautions and warnings. For further information on DePuy Synthes Products, please contact your local DePuy Synthes Representative.
Back To Top